Brute Thick Tile, Bowl & Porcelain Cleaner

BRUTE will safely clean and deodorize any type of porcelain facility - toilet bowls, sinks and tubs, tile and shower stalls, chrome, and stainless steel.  BRUTE removes hard water scale safely and will not discolor chrome or harm synthetic carpet when spilled.   BRUTE is a special thick mild effective cleaner that combines detergents and wetting agents coupled with a phosphoric acid base.  It quickly and safely removes rust, scale, and organic matter from all types of porcelain facilities and has a pleasant fragrance and is mild on your hands when using.

DIRECTIONS:

When cleaning wash basins, bathtubs, shower stalls, drinking fountains, tile, porcelain enamel, chrome, and stainless steel.  Dilute BRUTE with up to 15 parts water -- brush, swab, or spray on surface making sure surface in completely covered with BRUTE. Then brush or swab surface thoroughly.  Promptly rinse well after cleaning. 

DIRECTIONS FOR CLEANING TOILET BOWLS:   For best results - remove as much water as possible.  Hold bottle of BRUTE over bowl and apply 2 to 4 ounces of BRUTE to applicator.  Swab entire surface of bowl especially under rim at water outlets.  Flush toilet and rinse applicator.  Contains 25% phosphoric acid. 

Purchase on line here      MSDS Sheet here

Thick mild cleaner & hard water remover.

Safety clean was especially formulated for easy cleaning and removal of water deposits, heavy soap scum, soil, and greasy residues.   Safety clean may be used to clean and maintain commodes, urinals, showers, chrome fixtures, faucets and pipes.  Safety clean contains no hydrogen chloride or other harsh acids.

DIRECTIONS:

When cleaning wash basins, bathtubs, shower stalls, drinking fountains, tile, porcelain enamel, chrome, and stainless steel.  Dilute Safety Clean with up to 5 parts water -- brush, swab, or spray on surface making sure surface in completely covered with Safety Clean. Then brush or swab surface thoroughly.  Promptly rinse well after cleaning. 

DIRECTIONS FOR CLEANING TOILET BOWLS:   For best results - remove as much water as possible.  Hold bottle of Safety Clean over bowl and apply 2 to 4 ounces of Safety Clean to applicator.  Swab entire surface of bowl especially under rim at water outlets.  Flush toilet and rinse applicator.  Contains 8% phosphoric acid. 

Purchase on line here     MSDS Sheet here

DE-MIN-24

TOILET BOWL and URINAL CLEANER HEAVY DUTY CLEANER/MINERAL REMOVER

Economical to use - Rapid Activity - Highly Concentrated - Dissolves Encrustation's, Scale, and Stains

This highly concentrated blend of detergents, inorganic acids, wetting agents, and rinse additives is specifically formulated to keep toilet bowls and urinals bright and sparkling clean.  Regular; maintenance use of this product will help to clean traps and lines, aiding in preventing clogs.  This product may be used to recondition badly soiled bowls and urinals or for use as a regular maintenance housekeeping product.  By removal of mineral scale, organic matter and stains from bowl and urinal surfaces, the source of offensive odors is eliminated. NOTE:  This product is made for use on toilet bowls and urinals only.  Do not use on porcelain or enamel bathtubs or wash basins as etching will occur.  This product is a heavy duty cleaner hard water remover.  Contains 24% Hydrogen Chloride DIRECTIONS FOR CLEANING TOILET BOWLS:   For best results - remove as much water as possible.  Hold bottle of De-min 24 over bowl and apply 2 to 4 ounces of De-min 24 to applicator.  Swab entire surface of bowl especially under rim at water outlets.  Flush toilet and rinse applicator.

Purchase on line here                     MSDS Sheet here

  

DESCRIPTION:

A triple action, jelled, green bowl cleaner that cleans, deodorizies toilet bowls and other similar surfaces.   Contains a deep penetrating agent that loosens encrusted lime deposits, soil, stains and scum with ease.  Destroys bacteria on contact and leaves toilet areas with a fresh, mint odor.  Itís easy to use because the product is jelled and will cling to undersides of bowl rims and on vertical surfaces.  Contains 8% Hydrogen chloride.

DIRECTIONS:

  • Remove water from bowl by forcing over trap with applicator swab.

  • Press excess water out of swab.

  • Saturate swab with Might Mint, hold bottle and swab over bowl.

  • Clean entire bowl, under the rim and at water outlets.  Flush to rinse swab and rinse Mighty Mint off.

  • To clean urinals, saturate swab with Mighty Mint holding swab and bottle over urinal, swab entire surface with attention to grooves at sides and water outlets at the top.

  • Flush well and rinse out swab.

Purchase on line here     MSDS Sheet here

Disinfectant Toilet Bowl Cleaner Here

Shower Cleaners Here

Lyn Distributing Home Page Here

Lyn Distributing Acid Cleaners Here