Hydro ™ Proportioning and Dispensing Systems From Lyn Distributing

AutoDose Pump Dispensing Systems

Using flexible programming capability, the AutoDose pail pump accurately doses drains, cooling towers, boilers, pools, lubrication systems or other areas at the appropriate times. An easily programmed timer turns the pump on and off as required to ensure regular dosing of treatment chemicals.

Choice of power for operation lends safety and convenience

AutoDose systems run on eight “D” cell alkaline batteries, or two 6 volt batteries or 110-120 volt transformer. No electrical outlet is required at the treatment site when batteries are used which adds safety in wet areas. This is particularly critical in some drain areas, where local fire and safety codes may forbid outlets. This feature also makes installation easier, since location of the system doesn't depend on outlet availability. Another advantage of battery power is that it ensures dosing at the proper time, even during or after power outages. This can be critical to the effectiveness of treatment chemicals which require regular dosing at specified intervals. Batteries in the AutoDose pump system will power Hydro's patented pump for up to 40 running hours, providing months of service. The Hydro pump is designed specifically to extend battery life, reducing the frequency of battery replacement. These design advancements also increase tube and motor life  Choose the model that suits your need based on power supply desired and chemical.  The choice of tubes ( Norprene and Viton) give wide product compatibility.

Maximum flexibility for customized dosing

Hydro's 1000 Series AutoDose pumps offer great flexibility, making them the system of choice in many applications. Here's what the AutoDose offers in terms of customization of dispensing:

  • choice of days, time (AM/PM) and dose duration (one minute increments) 3.5 ounces per minute,

  • up to 8 dosing periods per 24 hours,

  • capability to dose every day, or just on specific days,

  • easy placement (due to size and battery power or 110-120 volt power).  

  • tube options (Norprene and Viton) for compatibility with a wide variety of products.

But maybe the most important benefit gained by using the AutoDose is that it doesn't forget to add a dose! This can greatly enhance the performance of the treatment product.

AutoDose  Pump specifications

Pump:

Flow rate

Tube

Power supply

Size

Timer:

Program duration

Events

Display

 

 

100cc (3.5 oz.) per minute at 23 RPM

4cc Norprene or 4cc Viton

Eight “D” cell alkaline batteries, or two 6 volt batteries or 110-120 volt transformer

6" tall x 14" wide 4" depth

 

7 days, daily variation

8 “on” and 8 “off” per day minimum time “on” — 1 minute

LCD

Complete system as shipped includes dispenser (pump, timer/control and motor), supply and discharge tube, injection fitting, cable ties, tubing barbs and two-piece plastic “bonnet” cabinet.

Hydro Systems From Lyn Distributing

Lyn Distributing Nation Wide Distribution USA

Phone: 800-366-5022   Fax: 801-295-5044 www.lyndist.com

Back to Drain Maintenance Pumps

Back to Proportioning & Dispensing Equipment

e-mail questions or information sales@lyndist.com

Down loadable literature sheet

© 2003