DRY MOLY LUBRICANT

Fast Drying

Withstands High Temperatures and Pressure

High Solids

Nonflammable

No Ozone Depleters

Price $7.00 each Discounts for 12 or more.

Description

A unique formulation for use on surfaces that require lubrication without the after-effects of a wet, greasy residual film. Uses include conveyors, open gears, king pens, sliding surfaces, couplings, belts, pulleys, chains, etc. Also excellent for coating parts to prevent corrosion during shipping and yet have them lubricated and ready to assemble at the job site. This is a molybdenum disulfide formulation which dries to a hard, black coating very quickly. It adheres to most all substrates, especially metal, with minimum surface preparation. It resists wear and abrasion, provides high lubricity, gives excellent extreme-pressure properties (up to 100,000 psi) and is stable at extreme temperatures, both high and low. Typical applications for this moly lubricant are chain lubricating, maintenance on furnaces, kilns, ovens, conveyors, gasket coatings, and mold release, etc. Very good anti-seize lubricant for head bolts, muffler clamps and pipe threads. Holds up under temperatures as high as 750°F.  16 ounce can. 

Directions

For best results apply to a dry, clean surface at room temperature. Shake very well until you hear the ball rattle in the can, then continue to shake for 30 seconds. Hold the can 6 to 8 inches from the surface and spray a thin even film. Avoid thick spraying, because it decreases effectiveness. 

Areas of Use

Automotive, oil field, marine, bakeries, mold releases, construction, mining, foundries, general maintenance, machine shops, plumbing, food processing, textile agricultural, printing, lumber, firearms, computer and manufacturing. 

Phone 1-800-366-5022 Spray Aerosols Home Page      MSDS Sheet

Lyn Distributing Home Page

Contact Us   About Us