INSTRUCTIONS BEFORE USE
U S SOLVENT AS AN ALL PURPOSE SOLVENT
TO REMOVE GREASE, SLUDGE, TAR, OIL, RESIN AND WAX FROM CABLES, TOOLS,
PARTS, EQUIPMENT, HANDS, ETC.
S Solvent evaporates completely leaving no residue. U S Solvent may cause skin drying, U S Solvent should
be used in an area having at least normal room ventilation.
The use, of solvent resistant gloves & goggles is recommended. Wash hands after use.
.Apply U S Solvent to item using saturated cloth, brush or dip the item
into the U S Solvent liquid for general parts cleaning solvent..
1-2 minutes for U S Solvent to dissolve grease this is a low odor solvent.
agitation or longer soak times for heavily soiled Items, Caution: Do not
immerse natural rubber items in U S Solvent for extended Periods of time
as swelling may occur.
this solvent cleaner dry with a clean cloth, or use forced air to accelerate evaporation. A
thin film of U S Solvent will evaporate completely in 5-8 minutes.
stops 1-4 as needed with this parts cleaning solvent.
Distributing 965 North Redwood Road,
Salt Lake, Utah 84054 Web www.lyndist.com
Phone 801-295-5022 Fax 801-295-5044
MSDS Sheet Before Using This Product.
U S Solvent
A low odor parts cleaning solvent
ENVIRONMENTALLY RESPONSIBLE AND
GREASES, TARS AND OILS.
CFC AND HCFC FREE.
COMMERCIAL AND INDUSTRIAL USE ONLY
Do Not take internally.
ingested, do not induce vomiting.
OUT OF REACH OF CHILDREN
for 55 gallon drum
PRODUCT #D2003-30-4 for 30 gallon drum
5 gallon container
Cas # 64742-47-8
Cas # 5989-27-5
FAST ACTING SPECIALTY SOLVENT ENGINEERED FOR UTILITY USE
U S Solvent
Solvent contains hydrocarbons. If ingested, do not induce vomiting.
S. Solvent fumes are non toxic, non narcotic and have a fresh
citrus odor. Use this low odor solvent in areas having at least normal room ventilation.
Solvent is minimally irritating if splashed into eyes, Wash, eyes with
water for 15 minutes.
Solvent is combustible under specific conditions not encountered during
normal use. Keep away from open flames and ignition sources. Use
recommended cleaning procedures.
AND LIMITATIONS OF DAMAGES
warrants that this material conforms to its chemical description and is
reasonably fit for the purposes stated on the label when used in
accordance with directions under normal conditions of use. BUYER assumes