|
Rinse-Aid
Hard
Water Rinse Additive
Concentrated
Rinse Aid for Dish Machines & Final Spot Free Rinse At Drive Through
Car washes
Dilutes 1 part concentrate to 750-1000
parts water.
|
|
|
|
| Purchase
Online Here! |
$5.55
Gallon Bottle |
 |
$39.95
6 Gallon Headpack |
|
|
|
This
product has been formulated to achieve sparkling spot and streak-free
dishes, glasses and silverware and to go one step further. Often with
unsoftened and non-deionized rinse water it is impossible to get spot-free
dishes and glasses. This product controls the hardness and total dissolved
solids of this water to yield consistently excellent results. Also it
controls the scale buildup in the rinse tank of conveyor and flight type
machines.
|
|
This product is completely safe to use. Its brilliant magenta color
clearly indicates the flow of fluid to the pump when priming and the
level in displacement Injectors. Due to the level of active ingredients,
this product may be diluted to very economical levels of use, yet still
render exceptional performance. Even in the worst water, glasses and
dishes dry film and spot-free. |
|
Often overlooked is an injector fluid's ability to dry dishes fast. This
is a must in volume dish wash operations. This product when used as
directed dries dishes, glasses and utensils quickly allowing them to be
put back in service without delay. |
|
This fluid is completely homogenous to provide consistent rinse action.
It is also non-corrosive to sensitive Injector components such as rubber
seals, metering valves, etc.
|
| DIRECTIONS: |
|
| Pilot
Bottle-Type
Injector:
Make
sure bottle is clean. Fill bottle with fluid. Adjust to approximately (1
ounce to 8 gallons water) 1 part per thousand 'use dilution'. Cycle
machine and run dishes through. Check drainage. Adjust until no water
breaks appear on dishes. An "orange I peel" pattern from water
drying off of dishes is best.
|
| Hydraulic
and Electric Rinse Pumps-insert feed tube into shipping container and
cycle rinse to prime or it pump has prime switch activate to prime. Adjust
metering value or pump stroke to deliver (1 ounce to 8 gallons water)
1 part per thousand 'use dilution'. Cycle machine and run dishes
through. Check drainage. Adjust until no water breaks appear on
dishes.
|
| Note:
For best results, rinse water should always be between 180°F-190°F. Also if proper rinsing and drying is not
achieved, check rinse nozzles for correct pattern and quantity of rinse |
|
CAR
WASH RINSE ADDITIVE:
Add to rinse water at the rate of 1 to 2 ounces
per 8 to 12 gallons of water. Adjust
to proper sheeting action. Car
will air dry without spots including windows. |