paper protectant, clear spray coating, clear spray, clear plastic spray
Acrylic Coating provides an invisible quick drying coating that protects wood, metal, photographs, artwork, blueprints, books, etc., from water, dirt, oil, chemical fumes, grease, skin oils, acids or alkalis. Prolongs life of coated pieces.
Apply to clean dry surface. Fan spray across surface from approximately 10 inches to provide a thin even coat. Allow several minutes before applying second coat. Dries hard in approximately one (1) hour.
Take a piece of tissue. Spray with acrylic coating. Let coating dry clear. Then put a few drops of water on tissue both the treated and untreated parts. Note the water penetrates through the untreated part while it beads up on the treated surface and you cannot feed the water on the underside.
Additional product data
Sprays a superfine mist, which provides an even coating with no brush marks. Eliminates mixing, brushing and clean-up problems. Sealed container cannot dry up or skin over as with paint type cans.
DangerContains ethyl acetate. Use only in a well ventilated area. Do not use near heat, sparks, or open flame. Avoid contact with eyes or prolonged contact with skin. In case of contact with eyes, flush with water. If irritation persists, get medical attention. Do not puncture or Incinerate container. Do not expose to heat or store at temperatures above 120°F. Keep out of reach of children.
|Spray Aerosols Home Page MSDS Sheet